I have a used but in New condition Trupro (woodman) scroll saw only purchased on the 09/09/14 for $710.00, has less than 30 minutes run time.
It also comes with a genuine Hegner quick release blade clamp which cost $65.70 and make blade change very quick and easy, it also come with Flying Dutchman blades which is listed below.
- Flying Dutchman ultra reverse #1, #3, #5, #7 (12 of each)
- Flying Dutchman scroll revers #2/0 (12)
- 4x Miniature drill bits for the above blades
- Pegasus geometry #3, #5 (1 of each)
Only selling due to having a back injury i find it very difficult to sit or stand for long periods of time and decided that scroll sawing is not me and i am deaply dissapointed.
Included in the sale is a table i built for the scroll saw out of 90x45 treated pine and the top is on a 15 degree angle which makes it easier to see the work piece and blade while cutting, the scroll saw is mounted to the table by 3 M8 bolts which also has anti vibration mat between the scroll saw and table and is virtually vibration free making it easier to make very precise and detailed work.
Very regretable sale but unfortunately my back will get no better and i feel the scroll saw will do nothing but be a dust collector, in total i have paid over $800 for the scroll saw, blades, blade clamp and material to build the table so i am asking for offers around $600 O.N.O so feel free to make a sensible offer.
I am located in Bathurst NSW, any question please call me on ******** 364 + click to reveal .
Unfortunately with the table and weight of the scroll saw i dont think it would be very economical to send via courier but if you can organise and pay for the service i can deliver it to any courier locally of your choice. Specifications are below:
Max. depth of cut - 65 mm
Throat capacity - 450 mm
Length of stroke - 20 mm
Speeds - 400~1400 rpm
Size of table - 450×235 mm
Table tilts - 45°(L)/ 10°(R)
Power - 120W/ 240V
N.W. - 29 kgs
G.W. - 32 kgs
CUFT - 685×360×380 mm
Machine dimension - 620×285×310 mm
This machine is not a cheap one that you will find from bunnings, this machine is a highly known clone of a Hegner which exceeds $2,000.
Most cheap units are single speed or 2 speed with a switch, this machine is a variable speed and can be set anywhere from 400 - 1400rpm and any where in between.
It also comes with a genuine Hegner quick release blade clamp which cost $65.70 and make blade change very quick and easy, it also come with Flying Dutchman blades which is listed below.
- Flying Dutchman ultra reverse #1, #3, #5, #7 (12 of each)
- Flying Dutchman scroll revers #2/0 (12)
- 4x Miniature drill bits for the above blades
- Pegasus geometry #3, #5 (1 of each)
Only selling due to having a back injury i find it very difficult to sit or stand for long periods of time and decided that scroll sawing is not me and i am deaply dissapointed.
Included in the sale is a table i built for the scroll saw out of 90x45 treated pine and the top is on a 15 degree angle which makes it easier to see the work piece and blade while cutting, the scroll saw is mounted to the table by 3 M8 bolts which also has anti vibration mat between the scroll saw and table and is virtually vibration free making it easier to make very precise and detailed work.
Very regretable sale but unfortunately my back will get no better and i feel the scroll saw will do nothing but be a dust collector, in total i have paid over $800 for the scroll saw, blades, blade clamp and material to build the table so i am asking for offers around $600 O.N.O so feel free to make a sensible offer.
I am located in Bathurst NSW, any question please call me on ******** 364 + click to reveal .
Unfortunately with the table and weight of the scroll saw i dont think it would be very economical to send via courier but if you can organise and pay for the service i can deliver it to any courier locally of your choice. Specifications are below:
Max. depth of cut - 65 mm
Throat capacity - 450 mm
Length of stroke - 20 mm
Speeds - 400~1400 rpm
Size of table - 450×235 mm
Table tilts - 45°(L)/ 10°(R)
Power - 120W/ 240V
N.W. - 29 kgs
G.W. - 32 kgs
CUFT - 685×360×380 mm
Machine dimension - 620×285×310 mm
This machine is not a cheap one that you will find from bunnings, this machine is a highly known clone of a Hegner which exceeds $2,000.
Most cheap units are single speed or 2 speed with a switch, this machine is a variable speed and can be set anywhere from 400 - 1400rpm and any where in between.
0 commentaires:
Enregistrer un commentaire