Hey Guys,
I have a couple of questions regarding building a new bathroom wall.
The plan:
The floorboards within the bathroom will be removed and replaced with Scyon CF and internal walls will be clad in 6mm Villaboard, I will likely tile the full height of the bathroom so will need to consider tile weight. Should I build the new frames over the existing floorboards or remove floorboard and attach directly to joists? Does the plasterboard where the new frame butts against the current wall/ceiling need to be removed or can I attached new walls to existing studs/noggins through the plasterboard?
I already have some lengths of 90x45 blue pine, is there any advantage in dropping down to 70x35 (i.e. easier to find door frames?).
Thanks,
Alex
Read the full thread at RenovateForum.com...
I have a couple of questions regarding building a new bathroom wall.
The plan:
- Walls will be L-Shaped enclosing an existing corner ~ 2000 x 3000 x 3000h
- Walls will be non-load bearing
- House is weatherboard cottage with timber floorboards
The floorboards within the bathroom will be removed and replaced with Scyon CF and internal walls will be clad in 6mm Villaboard, I will likely tile the full height of the bathroom so will need to consider tile weight. Should I build the new frames over the existing floorboards or remove floorboard and attach directly to joists? Does the plasterboard where the new frame butts against the current wall/ceiling need to be removed or can I attached new walls to existing studs/noggins through the plasterboard?
I already have some lengths of 90x45 blue pine, is there any advantage in dropping down to 70x35 (i.e. easier to find door frames?).
Thanks,
Alex
Read the full thread at RenovateForum.com...
Building Bathroom Walls
0 commentaires:
Enregistrer un commentaire