Hi. I have a scroll saw which I would like to run at a much slower speed. It currently has a combined off/on&speed switch, which is labelled 500 to 1500 strokes per minute. I would like it to run at half the current minimum, or less.
Is there an easy way I can do this without messing with it too much. I know very little about electrics/electronics but enough to be confident that if I start messing with the switches or the internals it will never run again!
Is there something I can buy which will reduce the speed?
I don't mind going to Jaycar and maybe buying a few things which I can solder into a jiffy box and fitting it in line - as that doesn't require me to modify the existing machine.
any ideas, anyone.
cheers
Arron
scrollsaw.jpgPhoto of the motor and switchgear attached.
Is there an easy way I can do this without messing with it too much. I know very little about electrics/electronics but enough to be confident that if I start messing with the switches or the internals it will never run again!
Is there something I can buy which will reduce the speed?
I don't mind going to Jaycar and maybe buying a few things which I can solder into a jiffy box and fitting it in line - as that doesn't require me to modify the existing machine.
any ideas, anyone.
cheers
Arron
scrollsaw.jpgPhoto of the motor and switchgear attached.
0 commentaires:
Enregistrer un commentaire