I have a very lightly used KB30 scroll saw. I have owned this since new.
I had cause to use it the other day but only had pinless blades. No problem I thought as I have adapters for it.
Unfortunately they don't fit! I have only ever used pinned blades.
I went to Mark at http://ift.tt/1HHJj1v and he suggests to remove the existing blade holder and bolt on my adapters.
But doing that the adapter lays horizontal and the blade/adapter does not rock on anything. You can see the adapter has pins to rock on in the holder groove. But this adapter does not fit into the current holder.
I am thinking this will just break the blades due to flexing.
Any Proxxon KB30 users out there with a solution, or know where I can get the correct blade adapters.
Thanks
Lyle.
I had cause to use it the other day but only had pinless blades. No problem I thought as I have adapters for it.
Unfortunately they don't fit! I have only ever used pinned blades.
I went to Mark at http://ift.tt/1HHJj1v and he suggests to remove the existing blade holder and bolt on my adapters.
But doing that the adapter lays horizontal and the blade/adapter does not rock on anything. You can see the adapter has pins to rock on in the holder groove. But this adapter does not fit into the current holder.
I am thinking this will just break the blades due to flexing.
Any Proxxon KB30 users out there with a solution, or know where I can get the correct blade adapters.
Thanks
Lyle.
0 commentaires:
Enregistrer un commentaire