This is a special prototype cutter I made at work (my trade). Simple but yet very time consuming. The shaft is 304 Stainless with a couple bearing diameters, mounted in Acetal plastic. All the fins have been lazer cut out of .7 Stainless sheet. Very simple to manufacture till we had to use the slitting saw which was also .7. We hoped it would cut slightly undersize in the plastic for the blades to press in, it did. We thought a 10mm deep cut would be easy in the plastic. The bastard flexed, veered of and snapped in half......lucky that was in the test piece. So we ended up with 2 @ 5mm cuts and didn't have an issue. Every 7 degrees for 700mm long. Anyway its all finished and works a treat.
Now everytime you have a balfours Apple Danish, you will know how the mesh pastry on top is formed.
Now everytime you have a balfours Apple Danish, you will know how the mesh pastry on top is formed.
0 commentaires:
Enregistrer un commentaire