Hi guys
I have approx 30m2 of jarrah decking which I got from a client which they pulled up from there house.
Its been denailed. The deck was laid reed side up, I am looking at using it for a small deck project.
I was going to use smooth side up but on smooth side there is a dark stain where the deck was sitting on the joists.
Now I have sanded the timber back and it comes up really good and seems a shame not to use it, but the dark stains are a no go.
Any ideas on how to remove, I was planning on putting it through a thicknesser but have concerned about taking too much off the timber.
2014-12-01 20.53.37.jpg
2014-12-01 20.54.00.jpg
Another Idea was to run the timber through the thicknesser the reeded side up will lose about 3mm from 20mm board.
Cheers
I have approx 30m2 of jarrah decking which I got from a client which they pulled up from there house.
Its been denailed. The deck was laid reed side up, I am looking at using it for a small deck project.
I was going to use smooth side up but on smooth side there is a dark stain where the deck was sitting on the joists.
Now I have sanded the timber back and it comes up really good and seems a shame not to use it, but the dark stains are a no go.
Any ideas on how to remove, I was planning on putting it through a thicknesser but have concerned about taking too much off the timber.
2014-12-01 20.53.37.jpg
2014-12-01 20.54.00.jpg
Another Idea was to run the timber through the thicknesser the reeded side up will lose about 3mm from 20mm board.
Cheers
0 commentaires:
Enregistrer un commentaire