I have the Sherwood version of this machine, but a lot of "manufacturers" produce a similar model.
The infeed table slopes away from the cutter head by approx. 5 mm over the length of the table. Of course the instruction manual is written in "Chinglish" and offers no assistance at all.
There is a cam style bolt in a slotted hole in the pivot bracket that one would think had some role in tweeking the table position, but two pins in interference fit holes seem to lock the table in the current position. (see photos).
Am I barking up the wrong tree? Can anyone offer some advice?
No I can't offered a better machine.
Bob
The infeed table slopes away from the cutter head by approx. 5 mm over the length of the table. Of course the instruction manual is written in "Chinglish" and offers no assistance at all.
There is a cam style bolt in a slotted hole in the pivot bracket that one would think had some role in tweeking the table position, but two pins in interference fit holes seem to lock the table in the current position. (see photos).
Am I barking up the wrong tree? Can anyone offer some advice?
No I can't offered a better machine.
Bob
0 commentaires:
Enregistrer un commentaire