A fairly common problem, this Emperor had the CA lift on the ends,:oo::((:? could have been caused by over tightening,:? or just going to fast(not waiting for it to harden),:( I have had it happen when putting the fittings on also,:-Attachment 365059Attachment 365060Attachment 365061Attachment 365062Attachment 365063Attachment 365064 so the job is not finished until it is finished! Every process needs due care.
Project is not yet complete, I have removed the old CA and sanded back, but have not tried reapplying CA, I will show those photos when the job is done, meanwhile just treat as Work In Progress, (WOP). Amos1 Brown Mallee CA lifted.jpg2 Removed CA to start again..jpg3 Back to wood after sanding.jpg4 Sanding 800 grit.jpg5 sanding 1200 grit.jpg
Project is not yet complete, I have removed the old CA and sanded back, but have not tried reapplying CA, I will show those photos when the job is done, meanwhile just treat as Work In Progress, (WOP). Amos1 Brown Mallee CA lifted.jpg2 Removed CA to start again..jpg3 Back to wood after sanding.jpg4 Sanding 800 grit.jpg5 sanding 1200 grit.jpg
CA Lifted on the ends
0 commentaires:
Enregistrer un commentaire