is there a quick and easy way of installing a remote switch to turn on a dc7 dusty. it has one of those switches which wont allow it to be turned on if it was turned off due to a power outage for example. forces you to physically press the on button to turn it on. because of this I cant just use a lead with a on/off switch on the end of it like i would do with a router table.
my dusty is inside a cupboard inside the garage which is vented outside (in a very harry hack kinda way). i dont wanna open the doors to turn it on everytime because it allows alot of the dust inside the cupboard to enter the garage workspace and then the rest of the house. not a single flat surface inside my house is not covered in dust.
20150804_142932[1].jpg
the remote doesnt need to be a fancy gadget which is infrared or radio frequency. a simple switch physically wired to the motor on the side of the cupboard will be just fine. is there a way of doing it without having to open up the switch gear and changing things inside it?
my dusty is inside a cupboard inside the garage which is vented outside (in a very harry hack kinda way). i dont wanna open the doors to turn it on everytime because it allows alot of the dust inside the cupboard to enter the garage workspace and then the rest of the house. not a single flat surface inside my house is not covered in dust.
20150804_142932[1].jpg
the remote doesnt need to be a fancy gadget which is infrared or radio frequency. a simple switch physically wired to the motor on the side of the cupboard will be just fine. is there a way of doing it without having to open up the switch gear and changing things inside it?
0 commentaires:
Enregistrer un commentaire