Hi guys,
I found a blank of pallownia or japanese kiri , it was
very light in colour and weight, not sure where it came
from but i thought i would give it a crack, this stuff has
some serious tear out problems , I sharpened the gouge
several times but it didn, t make any difference, in the end
I used the skew chisel and was just taking off dust !!:o
It was like i was sanding there was dust everwhere,
but it seemed to work , started sanding with 80g
thru to 800g eee and used ncl to finish!
Just done the bottom at the moment, and was
wondering if anyone else has turn this stuff and
with what sort of results, this is the result so far!:U
Any comments and advice welcome !
I found a blank of pallownia or japanese kiri , it was
very light in colour and weight, not sure where it came
from but i thought i would give it a crack, this stuff has
some serious tear out problems , I sharpened the gouge
several times but it didn, t make any difference, in the end
I used the skew chisel and was just taking off dust !!:o
It was like i was sanding there was dust everwhere,
but it seemed to work , started sanding with 80g
thru to 800g eee and used ncl to finish!
Just done the bottom at the moment, and was
wondering if anyone else has turn this stuff and
with what sort of results, this is the result so far!:U
Any comments and advice welcome !
0 commentaires:
Enregistrer un commentaire