This is surplus to my needs. It comes from a BP design cyclone that I built and used in a garage. I am in the process of upgrading the system which is now in a much bigger shed.
The blower has been modified to get the best performance it can deliver. The inlet is opened to 165mm which pushes the motor to draw about 7 amps with no restrictions to air flow. It also has a transition from the rectangular outlet to fit to a PVC 150mm storm water pipe on the outlet side. The carpet underlay foam is stuck to the blower housing to dampen sound transmission to the cyclone body. Impeller is 13" with 8 backward curved blades.
This is being auctioned with a start price of $60.
Cheers.
IMG_0093.JPGIMG_0092.JPGIMG_0091.JPGIMG_0094.JPG
The blower has been modified to get the best performance it can deliver. The inlet is opened to 165mm which pushes the motor to draw about 7 amps with no restrictions to air flow. It also has a transition from the rectangular outlet to fit to a PVC 150mm storm water pipe on the outlet side. The carpet underlay foam is stuck to the blower housing to dampen sound transmission to the cyclone body. Impeller is 13" with 8 backward curved blades.
This is being auctioned with a start price of $60.
Cheers.
IMG_0093.JPGIMG_0092.JPGIMG_0091.JPGIMG_0094.JPG
0 commentaires:
Enregistrer un commentaire