Hi all,
I recently purchased a small 3 wheel band saw it had no blade and no tyre no manual so the tyre's I got from the US fitted up well getting the blade size took a bit more doing tried using masking tape around the wheels and came up with 2165mm had a blade made up from Peacock saws (great service by the way) it was too small so I cut it ran it around the wheels and needed an extra 25mm in length so ordered another and it fitted well and ran a treat the saw cut very well nice and straight and no deflection in the height of the cut up to it's maximum of 165mm. After cutting a lot of tenons for a job, cut a few bowl blank's the tyre moved back on the bottom wheel resulting in the blade coming of the tyre with a thump as the tension released. The original tyres have lips to them that overhang the edge of wheel the new tyre's don't what would be the best glue to stick them with contact adhesive or would something else be better.
Regards Rod.
I recently purchased a small 3 wheel band saw it had no blade and no tyre no manual so the tyre's I got from the US fitted up well getting the blade size took a bit more doing tried using masking tape around the wheels and came up with 2165mm had a blade made up from Peacock saws (great service by the way) it was too small so I cut it ran it around the wheels and needed an extra 25mm in length so ordered another and it fitted well and ran a treat the saw cut very well nice and straight and no deflection in the height of the cut up to it's maximum of 165mm. After cutting a lot of tenons for a job, cut a few bowl blank's the tyre moved back on the bottom wheel resulting in the blade coming of the tyre with a thump as the tension released. The original tyres have lips to them that overhang the edge of wheel the new tyre's don't what would be the best glue to stick them with contact adhesive or would something else be better.
Regards Rod.
0 commentaires:
Enregistrer un commentaire