Now and again I get the urge to "clean up", often a few "left over" bits turn up, looking interesting and that puts an end to the cleaning routine. This is one of those cases. The gold hinge ring was found hiding on a shelf and was left over from when I used to sell a bit of gear. The segmented ring base was to be the neck ring of a vase. It was dumped because it had too much of an open grain and didn't suit the project. It was about four years old and was destined to be part of an AWTEX entry. The timber is quila. The infill panel in the top is a mix of red cedar and silver ash, also the end of the "log", that made a few motifs for boxes.
The whole thing came together reasonably well. It measures 85mm diameter and 45mm high.
C and C welcome
Jim
Hinged lid box1S.jpgHinged lid boxS.jpg
The whole thing came together reasonably well. It measures 85mm diameter and 45mm high.
C and C welcome
Jim
Hinged lid box1S.jpgHinged lid boxS.jpg
0 commentaires:
Enregistrer un commentaire