Hi guys,
A couple weeks ago I bought a 14" carbatec bandsaw off the marketplace and here are my 2nd and 3rd bandsaw box.
IMG_8655-2.jpg
They are made from a recycled red cedar board that I suspect was part of a door frame. It is 5 pieces of the board laminated together and then cut in half because it was too tall. It is finished with a couple coats of spray shellac. They are approximately 100mm wide at their widest part. I'm planning to give bansaw boxes to all the women folk on my wife's side of the family for Christmas which is about 20 so I should get plenty of practise and hopefully get a bit better at it.
A couple weeks ago I bought a 14" carbatec bandsaw off the marketplace and here are my 2nd and 3rd bandsaw box.
IMG_8655-2.jpg
They are made from a recycled red cedar board that I suspect was part of a door frame. It is 5 pieces of the board laminated together and then cut in half because it was too tall. It is finished with a couple coats of spray shellac. They are approximately 100mm wide at their widest part. I'm planning to give bansaw boxes to all the women folk on my wife's side of the family for Christmas which is about 20 so I should get plenty of practise and hopefully get a bit better at it.
0 commentaires:
Enregistrer un commentaire