A customer wanted a miter saw he could use as a tenon saw from time to time. We discussed back and forth filings, size etc. Finally I settled on a 20" tooth line with 4.5" under spine x 0.025" plate. 10ppi filed with 20* fleam and 15* rake. I considered a more aggressive rake. But decided against it since this is predominately a miter saw. Then I threw in a shaped spine. Just because. BTW, The saw still needs to have the spine engraved.
The 14" sash is just American walnut. 14" x 3.5" under spine. 11ppi with 8* rake. And there you have it. More of the same but a little different.
IMG_1404_zps3735a315.jpgIMG_1403b_zps13047698.jpgIMG_1389b_zps91a0671a.jpgIMG_1387b_zpsf0c90e51.jpg
The 14" sash is just American walnut. 14" x 3.5" under spine. 11ppi with 8* rake. And there you have it. More of the same but a little different.
IMG_1404_zps3735a315.jpgIMG_1403b_zps13047698.jpgIMG_1389b_zps91a0671a.jpgIMG_1387b_zpsf0c90e51.jpg
0 commentaires:
Enregistrer un commentaire