OK ............ following advice given in another thread (flycutter caused chuck to jam tight on headstock) am investigating collets. (birthday soon)
This collett ER32 COLLET - IMPERIAL #F6300
has to be mounted in a collet chuck and then a drawbar is attached to the collet chuck to secure it - a metric or imperial set of collets is available from CTC for approx $75ish and a chuck for $20ish
This collett C136 | 3MT Collet | machineryhouse.com.au sits directly in the taper on the headstock and needs a drawbar to secure it
Could somebody please kindly give me some pointers as to why and in what circumstances one of these would be preferred over the other ?
Thanks
Bill
This collett ER32 COLLET - IMPERIAL #F6300
has to be mounted in a collet chuck and then a drawbar is attached to the collet chuck to secure it - a metric or imperial set of collets is available from CTC for approx $75ish and a chuck for $20ish
This collett C136 | 3MT Collet | machineryhouse.com.au sits directly in the taper on the headstock and needs a drawbar to secure it
Could somebody please kindly give me some pointers as to why and in what circumstances one of these would be preferred over the other ?
Thanks
Bill
0 commentaires:
Enregistrer un commentaire