About 18 months ago I bought a framing gun for a Job. Since then it has been sitting under the bench in its original cardboard box. The other day I pulled it out to shoot half a dozen nails and noticed the box falling apart. To keep everything together, and a few nails (I have only put about 500 through the gun) the box will also hold googles, hex keys, a bit of oil, a syringe for the oil and the instructions.
This afternoon I made up the box, still need to do the lid. Materials used are 140*19 pine and 6mm marine ply. The corner joints are a bit rough, but they are a tight fit, hence why one piece broke as shown in the image.
Still need to make the lid, fit handle and catch. Lid will open sideways. Depending on time I will probably finish with varnish.
This afternoon I made up the box, still need to do the lid. Materials used are 140*19 pine and 6mm marine ply. The corner joints are a bit rough, but they are a tight fit, hence why one piece broke as shown in the image.
Still need to make the lid, fit handle and catch. Lid will open sideways. Depending on time I will probably finish with varnish.
0 commentaires:
Enregistrer un commentaire