Hello, I am trying to eliminate bandsaw drift by moving the blade back or forwards using the upper wheel adjustment on my Laguna 14/12 bandsaw, as recommended by Alex Snodgrass. But I don't put the gullet in the centre of the wheel, just centre the blade on the wheel as recommended by Laguna
Doing this, my bandsaw has a significant drift to the right i.e., if you cut a test piece along a straight line parallel to one edge of the piece, by the time you have cut 300mm the line and the test piece is angled to the right.
Does anyone know which is the correct upper blade movement to do for this? Ie., do I move the blade back or forward on the upper wheel? And why?
I've not had much luck with this moving in either direction. A very small change of the blade position makes a big difference.
Would be very glad of any assistance and suggestions
Doing this, my bandsaw has a significant drift to the right i.e., if you cut a test piece along a straight line parallel to one edge of the piece, by the time you have cut 300mm the line and the test piece is angled to the right.
Does anyone know which is the correct upper blade movement to do for this? Ie., do I move the blade back or forward on the upper wheel? And why?
I've not had much luck with this moving in either direction. A very small change of the blade position makes a big difference.
Would be very glad of any assistance and suggestions
0 commentaires:
Enregistrer un commentaire