Wood Turning Chuck Carbatec Set - Outstanding condition with MANY EXTRAS!!
This kit is being offered for a bargain and it contains a great selection of most of the extra jaws that you would want to use in your wood turning. It has had very little use. I used it to turn feet on a few bowls I had made.
Local Pick up and COD Preferred as the kit weighs 5.6kg with no packing.
I will post at the buyers expense which I think would come to around $35, or even more. Australia Post Postage calculator says 34.95 postage + Box.
Auction starts at $50. Pick up is in Oakleigh East, 3166. Buy it now price is $120
Complete set in fitted metal case.
Includes many accessories - some still in the original sealed plastic
This chuck is a 4-jaw Self-centering chuck using the precision, simplicity and reliability of the engineering chuck. It grips externally and internally, will hold square or round work and has a hollow so that through boring can be done from either end.
I found that the internal thread in the adapter was not long enough to seat properly on my Lathe (Jet 1642) so I made a wooden washer for this ( shown in Photos)
This chuck has had VERY little use. I am cleaning out my shed so it has to go.
IMG_1656.jpgIMG_1642.jpgIMG_1641.jpgIMG_1647.jpgIMG_1640.jpgIMG_1635.jpg
This kit is being offered for a bargain and it contains a great selection of most of the extra jaws that you would want to use in your wood turning. It has had very little use. I used it to turn feet on a few bowls I had made.
Local Pick up and COD Preferred as the kit weighs 5.6kg with no packing.
I will post at the buyers expense which I think would come to around $35, or even more. Australia Post Postage calculator says 34.95 postage + Box.
Auction starts at $50. Pick up is in Oakleigh East, 3166. Buy it now price is $120
Complete set in fitted metal case.
Includes many accessories - some still in the original sealed plastic
- Carbatec KC96S Scroll chuck 95mm
- Dovetail Jaws
- Compression Jaws
- Screw Point chuck fitting - 2 types
- Spindle fitting
- Faceplate ring
- Cole Jaws set with soft rubber buttons to hold your bowls for turning the foot. 250mm + expanding.
- T-Bar Allen Keys for adjusting.
- Spare screws
- 30X 3.5 threaded insert fitting to match lathe.
This chuck is a 4-jaw Self-centering chuck using the precision, simplicity and reliability of the engineering chuck. It grips externally and internally, will hold square or round work and has a hollow so that through boring can be done from either end.
I found that the internal thread in the adapter was not long enough to seat properly on my Lathe (Jet 1642) so I made a wooden washer for this ( shown in Photos)
This chuck has had VERY little use. I am cleaning out my shed so it has to go.
IMG_1656.jpgIMG_1642.jpgIMG_1641.jpgIMG_1647.jpgIMG_1640.jpgIMG_1635.jpg
VIC Scroll chuck 95mm. Carbatec - very little use
0 commentaires:
Enregistrer un commentaire