Never having used an oil finish before, I bought a can of Feast & Watson Tung Oil for a merbau book shelf I made. On the can it says touch dry in 2 hours, dry/recoat in 24 hours. But it is not dry. It's been 3 days (this morning is the 4th) and if you touch it you still get oil on your hands. Not much because it has soaked in, but it shows no sign of drying.
I did follow the instructions - brushed it on and wiped it off after 60 minutes. The weather has been OK in Brisbane, reasonably warm days and I don't think the humidity has been a problem.
Is it going to dry? When? Can I force it to dry? Or can I get it off somehow?
If this has been covered before, can someone point me to the thread?
Cheers.
I did follow the instructions - brushed it on and wiped it off after 60 minutes. The weather has been OK in Brisbane, reasonably warm days and I don't think the humidity has been a problem.
Is it going to dry? When? Can I force it to dry? Or can I get it off somehow?
If this has been covered before, can someone point me to the thread?
Cheers.
0 commentaires:
Enregistrer un commentaire